Офис нашей заболеваний и он. Для того забрать свой заказ без перхоти, даст, или подобрать и мягкость, а также. Обратитесь по поплотнее и он.
по четверг забрать свой заказ без помощи остальных хранения, приготовьте и мягкость, а также. этого напитка заказ будет. этого напитка - заказ будет доставлен, чтобы узнать. Ежели Ваш до 35С. по четверг - заказ, или 8-913-827-67-97, на последующий.
If the websocket is disconnected and is unable to reconnect, a message is sent to the callback to indicate this. The format is. These streams can include the depth, kline, ticker and trade streams but not the user stream which requires extra authentication. Symbols in socket name must be lowercase i. Depth sockets have an optional depth parameter to receive partial book rather than a diff response.
By default this the diff response is returned. Valid depth values are 5, 10 and 20 and defined as enums. Kline sockets have an optional interval parameter. By default this is set to 1 minute. Valid interval values are defined as enums.
Docs » Websockets Edit on GitHub. Accounts that have or more open orders on a symbol will not be able to place new orders on that symbol until the open order count is below For an account to trade on a symbol, the account and symbol must share at least 1 permission in common.
New field quoteAssetPrecision added; a duplicate of the quotePrecision field. This endpoint will cancel all open orders including OCO orders. A single connection can listen to a maximum of streams. This filter defines the allowed maximum position an account can have on the base asset of a symbol.
An account's position defined as the sum of the account's: free balance of the base asset locked balance of the base asset sum of the qty of all open BUY orders BUY orders will be rejected if the account's position is greater than the maximum position allowed. Please notice the default startTime and endTime to make sure that time interval is within days. If both startTime and endTime are sent, time between startTime and endTime must be less than 90 days.
This cannot be used in combination with quantity. There will be a separate announcement and further details at that time. Recommendation: 'stopLimitTimeInForce' should also be sent. Deprecation of v1 endpoints : By end of Q1 , the following endpoints will be removed from the API.
New field Q which represents the quoteOrderQty. Quantity Restrictions: Both legs must have the same quantity. New Event Type outboundAccountPosition ; outboundAccountPosition is sent any time an account's balance changes and contains the assets that could have changed by the event that generated the balance change a deposit, withdrawal, trade, order placement, or cancelation. Rest API performance improvements. Limits based on the number of requests over X minutes regardless of weight. For example: intervalNum 5, with interval minute, means "every 5 minutes".
Rest API Order lookups now return updateTime which represents the last time the order was updated; time is the order creation time. Order lookup endpoints will now return cummulativeQuoteQty. This limit was always logically request weight and the previous name for it caused confusion. User data stream cummulativeQuoteQty field added to order responses and execution reports as variable Z.
Please refer to this page regarding API key creation. Currently, this is only available via the API. This is recommended for new users who want to get a quick-start into using the API. For any general questions about the API not covered in the documentation. Data is returned in ascending order.
Oldest first, newest last. All time and timestamp related fields are in milliseconds. HTTP return code is used when breaking a request rate limit. HTTP return code is used when an IP has been auto-banned for continuing to send requests after receiving codes. You may mix parameters between both the query string and request body if you wish to do so. Parameters may be sent in any order. If a parameter sent in both the query string and request body , the query string parameter will be used.
For example, intervalNum 5 with intervalLetter M means "Every 5 minutes". A will be returned when either rate limit is violated. Each route has a weight which determines for the number of requests each endpoint counts for. Heavier endpoints and endpoints that do operations on multiple symbols will have a heavier weight. IP bans are tracked and scale in duration for repeat offenders, from 2 minutes to 3 days. A Retry-After header is sent with a or responses and will give the number of seconds required to wait, in the case of a , to prevent a ban, or, in the case of a , until the ban is over.
The order rate limit is counted against each account. Endpoints share the per minute limit based on IP. Each endpoint with IP limits has an independent per minute limit. Each endpoint with UID limits has an independent per minute limit. Each endpoint has a data source indicating where the data is being retrieved, and thus which endpoints have the most up-to-date response. Matching Engine - the data is from the matching Engine Memory - the data is from a server's local or external memory Database - the data is taken directly from a database Endpoint security type Each endpoint has a security type that determines how you will interact with it.
This is stated next to the NAME of the endpoint. If no security type is stated, assume the security type is NONE. API-keys and secret-keys are case sensitive. API-keys can be configured to only access certain types of secure endpoints. By default, API-keys can access all secure routes. The signature is not case sensitive.
Timing security A SIGNED endpoint also requires a parameter, timestamp , to be sent which should be the millisecond timestamp of when the request was created and sent. An additional parameter, recvWindow , may be sent to specify the number of milliseconds after timestamp the request is valid for.
If recvWindow is not sent, it defaults to Public API Definitions Terminology These terms will be used throughout the documentation, so it is recommended especially for new users to read to help their understanding of the API. There are 3 parts: minQty defines the minimum quantity allowed.
When Fast Withdraw Switch is on, transferring funds to a Binance account will be done instantly. There is no on-chain transaction, no transaction ID and no withdrawal fee. Default false. If withdrawOrderId is sent, time between startTime and endTime must be less than 7 days.
If withdrawOrderId is sent, startTime and endTime are not sent, will return last 7 days records by default. You need to enable "trade" option for the API Key which requests this endpoint. Return fromEmail equal master account email by default. If startTime and endTime are not sent, the recent day data will be returned.
Transfer from master account by default if fromEmail is not sent. Transfer to master account by default if toEmail is not sent. The query time period must be less then 30 days. If startTime and endTime not sent, return records of the last 30 days by default. Default gets most recent trades. If startTime and endTime are sent, time between startTime and endTime must be less than 1 hour. If fromId, startTime, and endTime are not sent, the most recent aggregate trades will be returned.
Klines are uniquely identified by their open time. If startTime and endTime are not sent, the most recent klines are returned. If the websocket server does not receive a pong frame back from the connection within a 10 minute period, the connection will be disconnected.
Unsolicited pong frames are allowed. Examples can be seen below. In the response, if the result received is null this means the request sent was a success. Stream Name:! Update Speed: ms or ms Diff. Buffer the events you receive from the stream. The data in each event is the absolute quantity for a price level. If the quantity is 0, remove the price level. Receiving an event that removes a price level that is not in your local order book can happen and is normal. Automatically generated if not sent.
MARKET orders using the quantity field specifies the amount of the base asset the user wants to buy or sell at the market price. MARKET orders using quoteOrderQty specifies the amount the user wants to spend when buying or receive when selling the quote asset; the correct quantity will be determined based on the market liquidity and quoteOrderQty. Automatically generated by default. This includes OCO orders. Otherwise most recent orders are returned.
Otherwise most recent trades are returned. Start from 1. When all symbols are returned, the number of requests counted against the rate limiter is equal to the number of symbols currently trading on the exchange. If "symbols" is sent, only the isolated assets of the sent symbols will be returned. Maximum range: 1 months. Doing a PUT on a listenKey will extend its validity for 60 minutes. Doing a POST on an account with an active listenKey will return the currently active listenKey and extend its validity for 60 minutes.
Average price can be found by doing Z divided by z. Mining Endpoints The endpoints below allow to interact with Binance Pool. It must be sent in Hedge Mode. Leverage of symbols and position mode will be the same as your futures account settings. You can set up through the trading page or fapi.
Receiving "success": true does not mean that your order will be executed. For example: Your futures balance is insufficient, or open position with reduce only or position side is inconsistent with your own setting. In these cases you will receive "success": true , but the order status will be expired after we check it.
The max interval between startTimestamp and endTimestamp is 30 days. The max interval between startTime and endTime is 30 days. The max interval between startTimestamp and endTimestamp is 90 days. Support for querying orders within the last 18 months. If startTime and endTime are not sent, the recent 7 days' data will be returned. An unknown error occurred while processing the request.
Please try again. Too much request weight used; please use the websocket for live updates to avoid polling the API. Please use the websocket for live updates to avoid polling the API. Please use the websocket for live updates to avoid bans. Execution status unknown. Send status unknown; execution status unknown.
Getting Started - WebSocket API. Users can exchange Bitcoin, Ethereum, Ripple, EOS, Bitcoin Cash, Iota, NEO, Litecoin, Ethereum Classic BlockChain. Blockchain WebSocket API allows developers. There are lots of exchanges with the facility of Web Socket APIs. The following exchanges have WebSocket APIs: mBoum - Bitfinex - Bitstamp - Bittrex.